How To Connect 2 Controllers On PS4 (Ultimate Guide for interesting gaming session)

How To Connect 2 Controllers On PS4

Playing games with friends and family on the PlayStation 4 can be a lot of fun, but to truly enjoy multiplayer gaming, you’ll need to know how to connect multiple controllers to your console. Whether you’re gearing up for an intense co-op session or a friendly competition, learning how to easily sync and set up two controllers on your PS4 is essential.

Hold down the Share and PS buttons simultaneously until the controller light starts flashing. With your main controller, go to Settings > Devices > Bluetooth Devices. Choose the new controller and press the X button to select.

 In this guide, you’ll walk through the step-by-step process of connecting two controllers to your PS4, ensuring that everyone can join in on the gaming excitement.

How can you connect two controllers to a PS4 console?

Connecting via USB:

  • Begin by turning on the console using the button located on it.
  • Connect a USB cable to one of the available ports on the PS4.
  • Attach the micro USB end of the cable to the top port of the controller.
  • Press the central PlayStation button on the controller until the lightbar becomes blue.
  • If the controller doesn’t connect, try using a different USB-A to micro USB cable.
  • Lastly, choose your desired profile from the provided options on the screen.

Connecting via Bluetooth:

  • Make sure the player indicator on the controller is turned off.
  • If the indicator is on, turn it off by pressing and holding the PS button until it goes off. Also, disconnect any USB connections from the controller.
  • Press and hold the PS button while holding the SHARE button. This will initiate pairing mode, and the light bar will start flashing.
  • Activate Bluetooth on the device you want to pair with and select the controller from the list of available Bluetooth devices.
  • Once the pairing process is complete, the controller’s light bar will blink, and the player indicator will light up.

As demonstrated, the process of connecting controllers to a PS4 console is relatively straightforward. However, if you encounter any challenges while attempting to pair your controllers, please don’t hesitate to ask any questions for further assistance from the helpline.

What are the steps to connect your PS4 controller to your PS4 console?

What are the steps to connect your PS4 controller to your PS4 console

Before you begin the process of connecting your controllers to your PS4, make sure you have the following items ready:

  • A PlayStation 4 Slim, Pro, or Standard console.
  • The PS4 controller(s) you intend to connect.
  • The included USB cable. In case the cable is missing, you’ll need a USB-A to micro USB cable.

Connect via USB

The simplest way to establish a connection between your PS4 controller and the PlayStation is by using a USB cable. Follow these steps:

  • Power on your PS4 using the button on the console.
  • Plug the USB cable into one of the available USB ports on the PS4.
  • Connect the micro USB end of the cable to the port located at the top of your PS4 controller.
  • Press the circular PlayStation button in the center of your controller. Repeat if necessary to activate the controller’s lightbar, which should illuminate in blue.

Troubleshooting Connection Issues

Unable to Connect via USB? If the USB connection method doesn’t work, try the following:

  • Use a different USB port on your PS4. The PS4 Pro has an extra USB port at the rear.
  • Test with an alternative USB to micro USB cable, such as one used for Android smartphones.
  • Allow the controller to charge for a while.
  • If the light bar doesn’t illuminate in yellow or blue, it’s possible that the controller or cable is damaged. Consider attempting the process with a different controller or cable.

How can you perform a hard reset on your controller?

Step 1: Power Down and Disconnect

  • Turn off your PS4 console.
  • Unplug both your PS4 console and your internet router or modem. This step ensures that the controller won’t receive any network signals during the reset process.

Step 2: Locate and Reset

  • With the initial steps done, flip the controller over to its backside.
  • On the right-hand side, search for a small hole.
  • Gently insert the paperclip into the hole, pressing the hidden button within for a duration of three to five seconds. It’s advisable to hold down the button for a count of 10 to ensure a thorough reset

How to charge a PS4 controller

How to charge a PS4 controller
  • Use the USB Cable: Connect the smaller end of the USB cable to the charging port on the back of your PS4 controller.
  • Connect to the Console: Plug the other end of the USB cable into one of the USB ports on your PS4 console.
  • Power On or Standby Mode: Make sure your PS4 is either powered on or in standby mode. The controller will charge in either state.
  • Charging Indicator: When properly connected, the light bar on the controller will begin to glow orange, indicating that it’s charging.
  • Charging Time: The charging process usually takes a few hours to fully recharge the controller’s battery.
  • Checking Battery Level: You can check the battery level of your controller on the PS4’s Quick Menu or the top-right corner of the main screen.

Further, When your PS4 is in rest mode, the controller can still charge if it remains connected, and during this time, the top light will change to yellow. Additionally, if your controller’s battery is running low, the light will flash yellow, accompanied by an on-screen message prompting you to connect it for charging.

Moreover, Once fully charged, the controller’s top light bar will display various colors based on its assigned player number: blue for player 1, red for player 2, green for player 3, and pink for player 4. This color coding helps identify each controller’s status and player affiliation at a glance.


Why is my PS4 controller blinking white?

The blinking white light on the PS4 controller can also be caused by low battery power. To resolve this, simply connect your controller directly to the console using a USB cable and allow it to charge. In about two hours, the battery should be fully charged and the flashing white light should stop.

Does PS4 support multiplayer?

Yes, the PS4 supports multiplayer gaming. It offers various multiplayer options, including local multiplayer where multiple players can play together on the same console, and online multiplayer where players can connect and play with others over the internet.

Can I use two PS4 at the same time?

Yes, purchasing a PS4 digital game through your PSN account enables you to access and play the game on a second PS4 console by logging in with the same account.

How long does a PS4 controller take to charge?

Charging the controller from empty to full typically requires about 2 hours. It’s recommended to charge the controller when the temperature falls between 10°C and 30°C (50°F and 86°F) for optimal efficiency; charging might not be as effective at temperatures outside this range.

Can you play the same game on two PS4?

Yes, purchasing a PS4 digital game through your PSN account enables you to access and play the game on a second PS4 console by logging in with the same account.


Overall, With the ability to connect two controllers to your PS4, you’re opening up a world of multiplayer gaming experiences that can be shared with friends and family. 

Whether you’re embarking on cooperative quests, engaging in thrilling battles, or simply enjoying some lighthearted fun together, having multiple controllers connected to your console allows everyone to be a part of the action. 

Moreover, By following the straightforward steps outlined in this guide, you can easily set up two controllers and dive into a world of multiplayer entertainment on your PlayStation 4. Get ready to create lasting memories and enjoy countless hours of gaming excitement with your loved ones.